To buy or for help call 888-236-5454
Monday to Friday from 8AM to 5PM PST
PCIe x8 Gen3 cable adapter, four PCIe x8 cable connectors, operates in expansion or networking mode with ExpressNet 2.0
The PCIe x8 3.0 quad-port, switch-based cable adapter has a DMA controller and optional NT ports. The cable adapter operates in I/O expansion or networking mode with a DIP switch setting change. The cable adapter comes with two standard height brackets installed.
The host adapter installs in the host computer’s PCIe x16 I/O slot, allowing communication between the processor and multiple I/O points
Insert the host cable adapter into a PCIe Gen3 x16 in two host system slots. Make sure that the card is well seated and tighten the screws on the face plates. Attach the cable(s) by first pulling back on the retractor ring. With the keyed slot aligned with the connector key ridge on the slot cover, insert the cable connector into the connector shell on the board until the connector teeth snap securely into the holes in the cable shell.
MAXexpansion.comTM warrants all products that it sells to be free of defects in material and workmanship for two years from date of delivery to the original purchaser. We also offer additional warranty options in the form of the following: Extended Warranties
Support Agreement Response to support calls where product does not operate as intended.
Interoperability Problems with Third Party Products Response to calls where the intended operation of MAXexpansion.comTM manufactured product does not meet expectation due to interoperability problems with third party products.
Please contact us at 888-236-5454 or email@example.com for questions regarding or the purchasing of our warranty options.
Customer Satisfaction Survey
PCIe expansion for HPC
(888) 236-5454(760) 745-9883 2235 Enterprise St, Ste. 110 Escondido, CA firstname.lastname@example.org
Credit Card Processing
MaxExpansion.com 2015 - All rights reserved.